Go to map of sites

Plot interactions
Zoom  -  Click and drag
Unzoom  -  Double click
Pan  -  Shift-click and drag
Choose dataset:    

Carbon in Arctic Reservoirs Vulnerability Experiment (CARVE), United States
Site Latitude 64° 59' 10.68" N (64.98630 °N)
Site Longitude 147° 35' 52.80" W (-147.59800 °E)
Site Elevation611.4 masl
Site codeCRV
Datasetco2_crv_surface-pfp_1_allvalid (GLOBALVIEW identifier CRV_01P0)
AssimilatedYes Switch to unassimilated subset
Selection schemeall valid measurements
Data providerJohn B. Miller, NOAA/ESRL, R/GMD 1, 325 Broadway, Boulder, CO 80305-3328, United States, and Anna Karion, NOAA ESRL Global Monitoring Division, 325 Broadway, NOAA GMD-1, Boulder CO, 80305-3328, United States, and Ed Dlugokencky, NOAA ESRL GMD, 325 Broadway GMD-1, Boulder, CO 80305-3328, United States, and Colm Sweeney, NOAA ESRL GMD, 325 Broadway GMD-1, Boulder, CO 80305-3328, United States, and Kathryn McKain, NOAA ESRL GMD, 325 Broadway R/GMD-1, Boulder, Colorado 80305-3328, United States
Partner(s)Charles Miller, Jet Propulsion Lab, 4800 Oak Grove Drive, Pasadena CA 91109, United States, and Larry Ledlow, United States
NOAA Global Monitoring Division, 325 Broadway, NOAA GMD-1, Boulder, CO 80305-3328, United States
Download these data via ObsPack.

(a) Time series of CO2 mole fractions, both simulated and observed, at this CarbonTracker observation site. In the top panel, measured mole fractions (open black circles) are plotted along with CarbonTracker simulated values (filled light blue circles). Any observations that CarbonTracker can not assimilate successfully are shown as filled red circles.
(b) The time series of model residuals--the difference between the simulated and measured mole fractions--shown with dark green filled circles. These residuals should be uncorrelated in time, unbiased (i.e., have a mean of zero), and distributed normally. Also shown in the lower panel is the imposed model-data mismatch ("MDM", orange lines), which in part defines the rejection criterion (see documentation). Any model first guess value which is more than three times the MDM away from zero, after accounting for potential adjustments to the simulated value due to optimizing fluxes, is rejected by the optimization system. Rejected values, if there are any, are shown with filled red circles.
(c) Summary statistics for model residuals from to . Residuals are defined as simluated values minus observed values. "Bias" is the mean of the residuals; "std. dev." is the standard deviation, and RMSE is root-mean-square error. All quantities are in ppm of CO2. The time period over which these quantities are computed is set by the graphs (a) and (b).

(d) Seasonal histograms of residuals

(d) Seasonal histograms of the residuals for this dataset. See caption for top figure for the definition of residuals. The left panel collects all residuals for each northern hemisphere summer (June through September); the right panel is the northern hemisphere winter (November through April). Residuals before 1 Jan 2001 are excluded from this analysis to avoid an effect of CarbonTracker burn-in from a poorly-known initial CO2 distribution. The tan color shows the histogram of the residuals themselves; the blue lines and statistics shown in blue text are a summary of the residuals interpreted as a normal distribution. For assimilated observations, the assumed model-data mismatch averaged over the seasonal span is shown in green (lines and text). The vertical scales are relative, determined by the number of observations and how tightly they are grouped, with the area under the histogram forced to unity.