Details and instructions on the Daily Compositing Page
Change: The ability to use your own http address for custom files is no longer supported due to security restrictions.
Variables are generally from the NCEP/NCAR Reanalysis except for the L&S OLR. Variables are those for which we have calculated daily long-term means. More will be added in the future. All NCEP variables start Jan 1 1948. Most continue through a few days before the present. Some are updated only through the last month. OLR start June 1 1974 and continues to May 2012
Levels are analysis levels. Geopotential height and specific humidity are not available at the surface. For pressure or SLP, specify surface.
Enter yyyy, mm, dd for the days you desire. For long-term means, use a fake year and enter the month,day. Years are from Jan 1 1948 to Dec 31, 2011
. For OLR, the range is Jun 1974 to [an error occurred while processing this directive]
To subtract one set of days from another, use a negative sign in front of the year.
If there are an unequal number of positive and negative years, the years are normalized. For example, the years:
will be calculated as
Enter the starting and ending day of the year. Also enter the year of the data. The year corresponds to the year of the last day of the range. That is, Dec 31 1999 to Jan 4 2000 should be entered as Dec 31 to Jan 4 2000. For the days to be used, a year must be entered. If a year is entered, it overides anything in the individual date entry boxes.
Use your own date File
There is a limit of 1000 days. Please download the data or use openDAP if that isn't sufficient
Create a text file in the following format
Make sure there is no miscellaneous text at the top of the file like headers.
Put the file in our anonymous
ftp directory. ftp ftp.cdc.noaa.gov and then cd /Public/incoming/dates/
and then put yourfilename. You will not be able to delete or rename the file.
We may run a scrubber to delete files over 3 days old so you may need to
re-ftp a file. Then, type
in the filename /Public/incoming/dates/yourfilename
and type in a plot
label. If the plot label is blank, all the days will be written which may not
Color or Black and White. Color ranges are chosen arbitrarily by the
developer (and may be subject to change).
Shaded or contour levels are available.
Average of the days specified.
The anomaly based on the 1981-2010 climatology is calculated for each day. The average of all days is then calculated.
For vector wind, the anomaly of the u and v components are calculated separately for each day. They are each averaged
and then the resulting u and v anomalies are plotted. The wind speed is the wind speed of the anomalies. If the u
anomaly component is -4 and the v component is -3 then the resulting wind anomaly vector points southwest and has a magnitude of +5.
The 1981-2010 climatology is calculated for each day (year ignored). The days are then averaged.
(Optionally) Enter Contour range/interval option
A desired contour interval and range can be input instead of the
default being used. Different plots can be easily compared (and the resulting
gifs could be animated). For this option to work, the interval AND the range
must be input. There must be at least 2 and less than 33 contours. The contour interval
must be positive and the range must go from low to high.
To plot over the dateline, use values from 0 to 720. For example, to plot
180W eastward to 180W, use 180 to 540. Be sure that the western most longitude is less than the eastern., For example, to plot 100W to 70W, use -100 to -70 or
260 to 290 and NOT 100 to 70.
There are 6 custom projections:
Northern Hemisphere: 0-90N, 0-360W in using a polar stereographic projection
To rotate polar stereographic plots
Globe: 90S-90N 0E-360W
United States: 20N-65N; 235-285 polar stereographic projection
Tropical Pacific: 35N-35S 100E to 60W
4-corner States of the Western US:31-42.5N, 244.5-258.5W CO,UT,AZ,NM
To rotate map, choose "custom" map projection and then choose either northern or southern polar stereographic projection. For lat range, enter 0 to 90
(for northern hemisphere) or -90 to 0 for southern. For longitude,
the center of the longitude range input will be at the bottom of the plot.
To center along 0E, choose -180 to 180, for example. To center at 90E,
choose -90 to 270. You can plot sectors as well. The longitudes -90 to 90 in the NH will plot the half hemisphere from the US across the Atlantic to Europe.
How this page was created
The main interface for this page is an html form. The data that are input into this
form are processed by a Perl script. The script reads the inputs, tests for
bad inputs and then executes a FORTRAN code that produces a composite file
(in netCDF). This file is what is processed by a GrADS script. The GrADS script
is run as a batch job with the plot created in a virtual frame buffer (to increase
the quality of the gif output). Plot options are input into the GrADS script
at this time. The plot in the frame buffer is converted to
gif and this gif is displayed as part of a html document. The netCDF file and the gif file
are kept in a directory where the files are periodically deleted.
Please let us know if find the page useful. Likewise, let us know
if you think any instructions are unclear, if you think there are bugs
or if you have any suggestions for improvements of any type. We would
particularly like to know if you use these pages for teaching purposes
and if so, how. We can be reached by email at
How to reference
Find out how to reference plots and datasets in publications.